Road Construction Equipment
Self Propelled Stone chip spreader is used for the even spreading of stone chips onasphalt-covered road under black road surfacing construction in addition to spreading aggregate chips onclay-bound macadam.
Sinoway chipping spreader is used for spreading chippings in the process of constructing road. It is used for spreading chips as underlying seal coat of higher-graded road and surface seal coat of lower-graded road construction, especially for large-scale continuous road construction work.
Main Advantages
The spreading amount is large, can meet the requirement of a variety of aggregate spreading.
Proportional control of the feed roller speed and the spreading speed, uniform spreading of the aggregates.
Combined control of belt feeding & the material level device, having achieved automatic control of material feeding.
The speed of the screw is synchronized with the speed of the feed roller, which is beneficial to the feeding and to the prevention of segregation.
The travelling system adopts the power transmission device of the heavy truck, the cost of maintenance is low.
Self locking traction hook, can realize convenient connection & separation between the spreader and the skip car in the continuous spreading.
High power diesel engine, its sufficient power reserve can adapt to various conditions of spreading and to resistance to heavy load changes.
Using the principle of automobile gas path control, so that braking and clutch operation are light and flexible, safe and reliable.
Two independent braking systems are used to ensure safe and reliable driving.
The mode of using advanced clutch to coordinate with gas assistance, greatly reduces the control force.
| Main specification | |
| Engine model | WP10 |
| Type | Six-cylinder water cooled,turbocharged |
| Rated power | 199kw |
| Rated speed | 2200rpm |
| Spreading width | 250-4000mm |
| Spreading speed | 2.5~5km/h |
| Max.travel speed | 23km/h |
| Max. spreading capacity | 22 L/m² |
| Min. spreading capacity | 2 L/m² |
| Aggregate size | 3-40mm |
| Belt speed | 100 r/min |
| Screw speed | 42 r/min |
| Feed roller speed | 42 r/min |
| Lateral spreading rate | ≥95% |
| Longitudinal spreading rate | ≥96% |
| Front spread hopper volume | 1.5m³ |
| Rear hopper volume | 2.8m³ |
| Dimension of spread hopper | 4240×940×1340mm |
| Min. turning radius | 14000mm |
| Wheelbase | 3850mm |
| Min.ground clearance | 235mm |
| Max.steering angle (front wheel) | 18° |
| Overall dimension | 7660×4240×3660mm |
| Operating weight | 12500kg |
Product Tags:
|
|
Road Building Construction Equipments 270hp Self-Propelled Stone Chip Spreader Images
|
